Construction Quality Management (CQM) for USACE Practice Test

These questions are part of the practice quiz. Start practicing

• Which option best describes how NCR history can support improvement efforts?
• SD-02 shop drawings must be submitted in what electronic format?
• SD-04 samples specify which aspects?
• What quality metrics and trending data are typically tracked on USACE projects?
• Which document defines the contractor's quality control organization, responsibilities, and procedures for a USACE project?
• Who is primarily responsible for performing field inspections and tests and maintaining QC documentation?
• What is the purpose of records management in CQM?
• Which item consists of statements printed on the manufacturer's letterhead and signed by responsible officials of the manufacturer's product, system, or material, and must be dated after award of the project contract and clearly name the project?
• Which of the following is NOT listed as a contractor benefit of CQM?
• If a nonconforming item is found, what action is required?
• Which statement best describes QA surveillance versus QA verification in USACE CQM?
• Name three common concrete tests performed on site.
• What is the purpose of a Quality Control Plan (QCP) and when must it be updated?
• What does a test report primarily document in construction quality management?
• What is a Field Change and how is it authorized?
• Pre-construction submittals are required when?
• Which document describes the contractor's QC organization, responsibilities, and procedures?
• Discrepancies found during tests should be handled by which process?
• How is the effectiveness of corrective actions verified?
• What does FIO denote?
• Who reviews submittals for conformance with given information and design intent?
• What is included in Work as defined for construction under contract documents?
• Which document records the testing and verification actions taken by a manufacturer's representative at the job site, or on a sample taken from the job site, during or after installation to confirm compliance with standards and instructions, and must be signed by an authorized official of testing laboratory or agency and state the test results to indicate pass or fail?
• What happens if QC requirements are repeatedly not met on a project?
• What is the role of the CQC Manager or QC Lead on a USACE project?
• What are typical closeout deliverables for a USACE project?
• Which statement best describes the government's role in CQM?
• Which step is performed first in the NCR closeout process?
• What does the D designation indicate?
• What action is taken when test results do not meet contract criteria?
• What is the purpose of a Quality Management System (QMS) on USACE projects?
• What information must be included in the drawing identification header?
• Which description best reflects a healthy quality program outcome?
• Which statement best describes the importance of documentation retention in CQM?
• What is typically included in a Daily Field Report (DFR) / Field Observation Report (FOR)?
• What is the purpose of QC metrics and how are they used for improvement?
• What should a QC lookahead schedule include to prevent delays?
• What does rebar placement inspection verify in structural work?
• What is the purpose of the QA Surveillance Plan (QASP) in project quality management?
• Which elements should be included in a nonconformance investigation plan?
• What is an Inspection and Test Plan (ITP) and what does it specify?
• Which term refers to external verification by an independent party?
• What are acceptance criteria and how are they applied to determine pass/fail?
• What is material traceability and why is it important?
• What best describes non-destructive testing (NDT) and a relevant example in CQM?
• What is the purpose of third-party QA/QC inspectors?
• What is the purpose of hold points in the ITP?
• What is the purpose of curing concrete?
• Substitutions require what?
• In CQM, how does a nonconformance differ from a defect?
• What is the Approving Authority?
• How does a Request for Information (RFI) help prevent quality issues?
• Which statement best describes SD-11 closeout submittals?
• What is the contractor quality control function?
• What is the ultimate objective of the government's CQM efforts?
• Why is a calibration log of equipment maintenance important in construction quality management?
• Which document is used to formally document a deficiency and require corrective action in the field?
• What is typically required on supplier Material Certifications?
• What is the purpose of a Test Report (TR) within the CQM process?
• What documentation is typically required at project closeout for CQM?
• How is the NCR closeout process conducted?
• Which aspect is NOT typically verified by rebar placement inspection?
• Which item is NOT included in product data content?
• Which document helps owners operate and maintain the facility after project completion?
• What does NCR stand for and what is its purpose?
• SD-06 test reports must be identified in the submittal how?
• What is the purpose of SD-11 closeout submittals?
• What is the QA Surveillance Plan (QASP) and what does it specify?
• Variations from accepted design require which approvals?
• What is the purpose of a Submittal Register?
• Which statement is NOT typically included in a Test Report?
• For SD-03 product data, what must be included for each section?
• What is the difference between field tests and laboratory tests for QC?
• SD-08 manufacturer's instructions require which information on product data?
• What is the difference between a shop drawing and a product data submittal?
• Who issues Architectural Supplemental Instructions (ASIs)?
• Which term refers to data provided by the manufacturer, or system provider, including help and product line documentation, necessary to maintain and install equipment for operating and maintenance use?
• What is a Nonconforming Work Report (NCR) and what information should it include?
• Which information is essential to demonstrate material traceability from supplier to installation?
• What does the close out final report include?
• Unless otherwise noted, what must specs comply with?
• What is the purpose of 28-day strength testing for concrete?
• Documents that are used in the project or become part of the project record, but are not submittals, have what fate?
• Which statement describes a Change Order (CO)?
• If a document is not a submittal, what is its relation to the project?
• Which practice best supports preventing misinterpretation of requirements?
• Are Submittals contract documents?
• What is the purpose of formwork inspection?
• What accompanies the document to carry the contractor's approval stamp?
• What is an Architectural Supplemental Instruction (ASI) in the contract process?
• What is the purpose of an 'as-built' submission and when is it required?
• What is the relationship between the QCM and QA oversight?
• How does proper curing affect hydration and the resulting strength and durability?
• What is a Request for Information (RFI) and its purpose?
• What should be included in a daily diary to support CQM?
• SD-11 closeout submittals are associated with which stage of project management?
• Which of the following is NOT typically included on supplier Material Certifications?
• How should field change orders (FCOs) be handled within CQM?
• In CQM, who performs QA verification of QC results and processes?
• What is a Hold Point in the ITP?
• Two factors cause the construction industry to become highly specialized.
• What is a Field Change Directive and when is it used?
• SD 01 precon submittals require what?
• Which statement best describes Hold Points and routine verification inspections?
• What is the purpose of test specimen handling and storage requirements?
• What does RMS-CM stand for in contractor mode?
• How should data be provided in SD-11 closeout submittals?
• What should specs be sufficient to fully describe?
• What is the purpose of the standards section requiring that tests show compliance with a referenced standard?
• Which SD format requires a table of contents listing page numbers and catalog numbers?
• What is the purpose of a lookahead schedule in QC management?
• Which statement best describes the handling of final drawings at project closeout?
• What options may the designer indicate on drawings about submittals?
• Which non-destructive testing method is commonly used to detect internal weld flaws without destroying the part?
• What are contractor benefits of CQM?
• Which step best ensures traceability of test results within a quality program?
• What is test method correlation and why is it important?
• SD-09 manufacturer’s field reports must be identified in the submittal how?
• What is the difference between workmanship and material conformance in quality management?
• How should nonconforming materials be dispositioned and who approves it?
• What should be included in a QC/QA records archive to support audits and claims?
• Which unit convention is required for data in SD-11 closeout submittals?
• If submittals are not checked and signed by the GC, what should the designer do?
• What is the role of as-built drawings in QC closeout?
• Who performs and records inspections/tests as defined by the ITP?
• In standards compliance, what is acceptable in lieu of directly meeting a standard?
• Which statement best describes the difference between Quality Control and Quality Assurance in USACE CQM?
• NCR stands for Nonconformance Report. Which option correctly states that?
• What is the purpose of a Daily Field Report (DFR) / Field Observation Report (FOR)?
• Which of the following is an element listed as a factor influencing future QC/QA requirements and management systems?
• What is the primary reason for proper segregation and quarantine of nonconforming materials?
• What is a Nonconformance Report (NCR) and its purpose?
• Where should the government contract number appear for each submittal?
• What is commissioning in construction and why is it important?
• Which statement best describes Government Quality Assurance on a USACE project?
• If a field condition does not meet requirements, which document is typically issued to document the deficiency and initiate corrective action?
• What is the process for reinspection after NCR closure?
• Which statement best describes the difference between field tests and laboratory tests?
• How are submittals reviewed and who approves them?
• How are witnessed tests documented in QA/QC records?
• Which statement best describes Submittals in the construction process?
• What is the primary purpose of the Construction Quality Management (CQM) program on a USACE project?
• What is an AML and why is it needed?
• What should a typical closeout package include?
• What is a Submittal Register and why is it used?
• Which item is a factor that will influence both the government and the construction industry in the future?
• If a submittal is returned for revision, what is the typical next step?
• SD-02 shop drawings have size constraints; what are they?
• Which item is typically included in a contract closeout and handover package?
• How should materials receiving and storage be controlled to maintain quality?
• Which document ensures materials meet contract specs before use?
• What is the sequence after consultant review?
• Why is calibration of testing equipment critical in CQM, and how is it maintained?
• How should record drawings and as-built drawings be managed during construction?
• Who reviews submittals after the designer if necessary?
• What must be provided for each discipline of work?
• Which statement best describes the relationship of SD-11 documents to the project record?
• A Field Density Test assesses which property?
• What is a Punch List?
• What is CQCSM?
• What does the G designation require?
• Who reviews and approves submittals such as shop drawings, product data, and samples on USACE projects?
• SD-05 design data requires data and certificates to be on which page size?
• In a test report, which element communicates whether the tested item meets acceptance criteria?
• What are spare parts and maintenance manuals and why are they required?
• Which SD format requires that data and certificates be presented on 8.5 by 11 inches unless specified?
• How does the ITP relate to QC activities on a USACE project?
• Which closeout deliverable provides the record of the project’s final geometry as constructed?
• What file format requirement includes bookmarks and searchable text?
• How should a Submittal Log be managed to support quality control?
• Which environmental requirements are typically included in CQM?
• During commissioning, who verifies system performance against the specified criteria prior to handover?
• What is the purpose of submittal approval times in project scheduling?
• How should temporary works be integrated into the CQM process?
• What should be included in design submittal packages?
• Under what condition is independence of the testing laboratory required on USACE projects?
• What is quality?
• Which term refers to preprinted material describing installation of a product, system, or material, including special notices and concerning impedances, hazards, and safety instructions?
• What is a Change Directive (CD) and how does it differ from a Change Order (CO)?
• Which submittal is used to record compliance with technical or administrative requirements or to establish an administrative mechanism, and also to end a contract or major phase?
• The 'C designation' requires which action?
• Which term describes fabricated physical examples of materials, equipment, or workmanship that illustrate functional and aesthetic characteristics and establish standards?
• Product data in pre-construction submittals includes which items?
• How does QA oversight relate to safety and environmental compliance within a quality program?
• What is the role of QA/QC during concrete placement and curing?
• Which statement best describes the lifecycle context for quality activities on construction projects?
• DOR stands for what?
• How can NCR history be used to drive process improvement?
• What is the purpose of weld inspection in construction quality management?
• Where should the contractor's approval stamp be applied for SD-11 closeout submittals?
• Which data includes help and product line documentation necessary to maintain and install equipment for operating and maintenance use?
• What is the difference between Shop Drawings and Product Data in submittals?
• Which group is primarily responsible for initiating corrective actions based on Field Observation Reports?
• Pre-construction submittals include which type of information?
• Which term covers calculations and analyses pertaining to a portion of work?
• How should changes in scope affect the QC plan and acceptance criteria?
• Which item is used to indicate that testing has been performed and the results show pass or fail, and is signed by a testing laboratory official?
• Which entity applies the contractor's approval stamp to the SD-11 closeout document?
• Which documents constitute a typical closeout package for CQM?
• Who conducts final acceptance testing and commissioning on USACE projects?
• Which statement correctly distinguishes a Change Order (CO) from a Change Directive (CD)?
• Which term covers calculations, mix designs, and analyses pertaining to a part of work?
• In QC management, what does an NCR typically document?
• Which NCR disposition involves replacing the nonconforming item or taking corrective action to bring it into compliance?
• Why are calibration certificates important and how should they be stored?
• Which statement is true regarding SD-11 closeout submittals?
• Which document is signed by an authorized official of a laboratory and shows that a material, product, or system has been tested in accordance with specified requirements, and must have been completed within 3 years of the date of contract award?
• Which statement best captures the role of pre-construction submittals in a project?
• GPV stands for which term?
• Which document-related action is explicitly described in the SD-11 closeout submittals format?
• In SD-11 closeout submittals, where should the data be presented?
• How do an NCR and a Corrective Action Report (CAR) relate in Construction Quality Management?
• How should field testing laboratories be qualified and used on USACE projects?
• Field Observation Reports (FOR) are used to document quality deviations or safety concerns observed in the field and are used by which group to initiate corrective actions?
• What does the A designation indicate?
• How are test results used to determine material acceptance?
• SD-07 certificates require what page size?
• How do acceptance criteria influence payment on a USACE contract?
• SD-08 product data references should include which sources?
• Which of the following best describes the ongoing relationship between QC and QA on a project?
• What is the relationship between commissioning and CQM?
• What is a Hold Point in construction QC?
• What is the purpose of Construction Quality Management (CQM)?
• What is the purpose of recordkeeping for materials and tests in QC?
• SD-10 O&M covers what requirement?
• Which quality metrics are commonly used in CQM?
• Why is calibration of test equipment essential?
• Which party is primarily responsible for implementing the CQC plan and ensuring contract compliance on site?
• Which document documents root-cause analysis and corrective/preventive actions to close an NCR?
• Which documentation records compliance with technical or administrative requirements or to establish an administrative mechanism, and may include special requirements to end a contract or major phase if a multi-phase contract?
• SWPPP compliance in CQM environmental requirements primarily addresses which area?
• Which statement correctly contrasts as-built drawings and record drawings?
• What is an RFI (Request for Information) and how does it impact quality control?
• Which software system is used by the government to generate the submittal register loaded into RMS-CM?
• Which statement best describes the Change Directive (CD) in contract management?
• What information is typically included in daily field reports (dailies) used in CQM?
• TPC stands for which term?
• What is the purpose of SD-11 closeout submittals format?
• What is the primary difference between Contractor Quality Control (CQC) and Government Quality Assurance (GQA) on a USACE project?